Factory direct flat pack kitchen suppliers in ACT, NSW, QLD, WA, SA, VIC providing custom made to measure high quality low cost kit set DIY kitchens, laundry, bathroom cabinets and wardrobe inserts for cheap self assembly by the Handyman DIY kitchen flatpack cabinet installer or Trade Professional.



STEP 1: Bench Tops

STEP 2: Select Cabinet
- Wardrobe Inserts

- Floor (Base) Cabinet
- Floor (Base) Drawer
- Floor (Base) Corner
- Floor (Base) Diagonal
- Floor (Base) Combo
- Floor (Base) Open
- Floor Open Angle
- Floor Cnr 135 Deg.
- Upper (Wall) Cabinets
- Upper (Wall) Corner
- Upper (Wall) Diagonals
- Upper Open Angle unit
- Upper Open units
- Upper Cnr 135 Deg.
- Storage/Pantry
- Corner/Walk-in Pantry
- Range Hood Cabinet
- Oven (Underbench)
- Oven (Tall Tower)
- Microwave Open Units
- Fridge Cabinets

- Your Design Cabinet

STEP 3: Single Parts

STEP 4: Door Handles

STEP 5: Colour & Profiles

STEP 6: DISCOUNTS.

STEP 7: DELIVERY

FEEDBACK please



CABINETMAKERS AREA
--Base (Floor) Cabinets
--Base (Floor) Corner Cabinets
--Floor and Wall Diagonals
--Storage/Pantry Cabinets
--Walk-in Pantry Cabinets
--Floor Drawers Cabinets
--Upper (Wall) Cabinets
--Upper (Wall) Corner Cabinets
--Upper (Wall) Angled Corner
--Under Bench Oven
--Wall Overn
--Laundry / Broom Cabinets
--Wardrobe Inserts

Hardware (for Carcase Cabinets)
--Wall Overn

Sub Categories
Height to 2100mm
Height 2101 - 2350mm

Wall Oven cabinets

Wall Oven- microwave-cabinet-drawers   Wall Oven with Drawers, Microwave box and Cabinet -

Wall ovens are typically built with White Melamie side panels covering a combo of Oven surround - 2xDoor Cabinet - 2xFront Drawers - Microwave box  integrated with colour matched End & Back Panels, and some variations on this scheme. Carcass is made from HMR 16mm PB.

Additional colour matched End Panels may need to be Ordered to cover exterior sides open to view.
For further constuction details see  "General Construction page.
The system offers units in four Material Types in sixteen Styles in  two Height ranges, Width up to 600mm or 700mm and a Depth up to 600mm. The bottom 'shelf' can be machined for a ventilation opening.

NOTE: The Upper Cabinet (with two shelves if Cabinet Height  is above 700mm) and the (equal) Drawer Heights are calculated from your specifications for Unit Height, Oven Height and Distance from Base.
Select from the Height range and Material Types, then select from the various model options and then in the "Prompt Boxes" replace "?" with the required value for Height, Width etc. :

Use "Special Requests" for a quote on a non-standard preferred Material, Colour or Style.


 


Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant
© Cabinets on Demand 2008  
ecommerce Software