On-line exact costing including discounts and delivery.
Support:Toll-free 1300 876 778
See also: F.A.Q (Answers to Frequently Asked Questions)

STEP 3: Single Panels etc. > Carcass Material Panels

Panels - Carcass material - 16mm HMR WHITE

Some customers prefer to order pre-cut and edged panels to build their own design cabinets.

The basic Melamine covered Carcass material is the most economical material due to it's durability, availability, and low cost.

The carcass material is virtually the same colour and material as White Laminate (see below) but the colour quality control is less and there may be small inperfections - however the price is substantially lower than guaranteed White Laminate which is used for Doors and External Panels - it is used for carcass building or any other general purpose.

The Laminate panel is 16mm thick door and is pre-coated on both sides in the same colour. The substrate is a HMR (High Moisture Resistant) material and the Edgings of the Doors are all finished in a 1mm thick PVC Edge -This is far superior to the tradional iron-on paper edges as they are not only extremely durable, but don't go brittle over time like their predecessor. Cleaning is easy with a sponge using warm water liquid cleaners. Harsh cleaning products are not recommended.

Select from the Product options below, replace the Height/Width Dimensions or the "?" in the PROMPTS with your required value , then record your specification on your virtual "Shopping Cart" (ViewCart) by clicking the buy110-old.gif--Clickbutton for additional  explanations.  
For an example see Sample Base Cabinet.htm
.



Panel - Carcass material HMR - White
Panel -  Carcass material HMR - White

Price is calculated on dimensions specified



QTY:
Height to 2350mm

Width to 1150mm

Bottom Edge Reqd. - if ticked
Top Edge Required - if ticked.
Left Edge Required - if ticked
Right Edge Required -if ticked
Your Reference

Special requests

 

Sub Categories










© Cabinets on Demand 2004