Flat pack kitchens & cabinets Australia logo

Custom sized cabinets.
Support:Toll-free 1300 876 778 or email support@cabinets-online.com.au

- OVEN (Tall Tower) units



Wall Oven and Microwave Cabinet with 2x Drawers below and 2x Doors above

 
Wall Oven- microwave-cabinet-drawers  Standard-cabinets.sml.jpg Wall Oven with Drawers, Microwave box and Cabinet -

Wall ovens are typically built with an additional one or two End/Side panels covering a combo of Oven surround - 2xDoor Cabinet - 2xFront Drawers - Microwave box (with colour matched End & Back Panels), and some variations on this scheme. Carcass is made from HMR 16mm PB. The Oven area itself does NOT have a back panel.

Additional colour matched End Panels may need to be Ordered to cover exterior sides open to view.

The system offers units in four Material Types in sixteen Styles in  two Height ranges, Width up to 600mm or 700mm and a Depth up to 600mm. The bottom 'shelf' can be machined for a ventilation opening.

NOTE: The Upper Cabinet (with two shelves if Cabinet Height  is above 700mm) and the (equal) Drawer Heights are calculated from your specifications for Unit Height, Oven Height and Distance from Base.
In the PROMPTS for each product the ""Oven Height" is is the External height of the Oven from very bottom to the very top (not the inside height); 
the "Height of Oven from Base" is the distance from the very bottom of the Oven cabinet to the very bottom of the Oven itself and the "Microwave Opening height is the clear opening space that the MW goes into.

Please overwrite the default values or "?" shown in the Prompt Boxes with your specific values and a new calculated price will be shown on the Shopping Cart (see label "ViewCart" above.

NOTE: The Upper Cabinet (with two shelves if Cabinet Height  is above 700mm) and the (equal) Drawer Heights are calculated from your specifications for Unit Height, Oven Height and Distance from Base.

Height = Box Height Only (this does not include height of the Adjustable Legs/Kickboard or the thickness of the bench top).
    Example: If a 900mm High over-all Bench height is desired:
      900mm Bench Top thickness (E.G.: 34mm) Kickboard Height (E.G.: 146mm) = Cabinet Height 720mm.

Width = Outside Width of the Carcase (Cabinet) - excluding any Coloured Panels that may be required to be screwed on later.

For Tall Over Units the Width is determined by the Width of your Oven.

Depth = Outside Depth of the Cabinets including the thickness of the Door (or Drawer Front).

Typically the Oven Height specification is 600mm to fit an oven height of 595/596/597/598mm).
The Width of a normal wall oven cabinet today is 600mm (as this fits an oven 595/596/597/598 mm wide).
The Depth is typically 580mm or 600mm (to match the bench top width).

Oven Height" = the External height of the Oven from very bottom to the very top (not the inside height); 

"Height of Oven from Base" = the distance from the very bottom of the Oven cabinet to the very bottom of the Oven itself; 

"Microwave Opening Height = the clear opening space that the MW goes into; 

Shelf(s) Required = Specify number of shelves required from 0 -7. Normally ONE for Cabinets < 750mm and 5-6 for Pantry cabinets. Cabinet price is adjusted for number specified.

Shelves = Choose between either Fixed or Adjustable type shelving.

Shelf Depth: [?]= Identifies if the Shelf is Set-in from the front, the Default is set to 15mm for Upper cabinets. To modify - Select one of the options..

Door Hang="
Select Right, Left or None as required. 

Soft Close?  = Special Soft Close Hinges can be used, at a extra cost of $6.00 per hinge, or $12 per Door < 900mm in Height. Greater Height needs more hinges, up to 5 for >2100mm

Push to Open mechanism  = Instead of using door handles this mechanism will open the door after a good push- extra cost is $25 per Door

Door Style - Material Finish

              • Carcass (Plain White Melamine) - 16mm thick High Mositure Resistant (HMR) particle board;
              • Laminate (Melamine) - 16mm thick Coloured ;
              • GLOSS Laminate (Formica) - 16mm thick;
              • Unfinished - 16mm Craftwood (MDF) -  with a range of Face and Edge profiles - ready for DIY painting;
              • Belmont (Vinyl Wrap - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
              • Byron Bay (Vinyl Wrap - GLOSS finish) - 18mm thick with a range of Face and Edge profiles ;
              • Albany (Polyurethane painted - TEXTURE finish) -  18mm thick with a range of Face and Edge profiles ;
              • Avoca (Polyurethane painted - GLOSS finish) - 18mm thick with a range of Face and Edge profiles. 
  •                  For a more detailed description of these  different STYLES and Price considerations please see:  Cost Considerations.

    At the end of all your product ordering you MUST specify (using STEP 5: Colours & Profiles) your choice of Colour and Finish; you must have a colour choice for each product Style selected - the colour can either apply to one of: Doors & Drawers, Panels or Kickboards, or ALL of these.

    You can mix different Product styles in an order, for example Painted Doors with Vinyl Wrap Panels, each with its own Colour and Profile- BUT if you want different colours for different products in a particular Style (for example Doors are specified In Beige, but you want Drawers in Light Green) then you should make a separate Order for these. (and let us know so we can ensure correct Discount calculations over both Orders.)

"Special Requests" can be used to: (for example) state you preferred Door Gap measure e.g. 1mm (in place of our standard 1.5mm); or any other need e.g. 'No shelf holes to be drilled'.

"Your Reference" is any reference you may want to make, for example to your Design Sketch/Drawing.

When you [CLICK] on the "Add To Quote" button the Product specifications are listed on a 'Shopping List' ( "Shopping Cart")  that identifies all Products that you have selected for a "Final Quote" from the Production Manager.

Only when you are ready and the Items have been validated for consistency on YOUR PC will you be prompted to submit your personal details and the contents of the shopping cart to the central system for a final QUOTE.
Your data will be stored for some 12 days on your PC to allow easy order specification.

Use button to return to the Product Page




QTY:
Height to 2350mm

Width 600 - 1000mm

Depth up to 600

Oven Height

Height of Oven from base

Microwave Opening Height

Tick for Ventilation Hole
Shelf(s) required?

Shelves

Shelf Depth

Hinge Type

Upgrade to Soft-close drawers?

Upper Door Hang

Door Style - Material finish

Your Reference

Special requests

Return to Last Page-->

Return to Home Page-->

View[Shopping]Cart---> © Flat Pack Cabinets Since 2004